Specifications

	Harris Model 2030
Temperature Range without lights	5ºC to 60ºC
Temperature Range with lights	10ºC to 60ºC
Heater	1160 Watts @115VAC
Compressor	¼ hp, 2940 BTUH/Hr @ 7ºC evaporator
Temperature Control	±0.1ºC
Temperature Uniformity	±0.3ºC
Relative Humidity	20 to 98% RH*
Humidity Control	±2%
Interior Dimensions	30” W x 27.5” D x 63.5” H (76.2cm x 69.9cm x 161.3cm)
Exterior Dimension	36.0”W x 39.0”D x 90.0”H (91.4cm x 99.9cm x 228.6cm)
Work Space	30 cu. ft. (850 liters)
Airflow	Horizontal
Access Ports	(2) at 2” for fresh air
Temperature Safeties	Redundant high temperature safeties
Shelves
Number of Shelves	5 stainless steel, wire rod standard
Shelf Spacing	1.5” on center (37 positions)
Shelf Space	Each shelf: 29.25”W x 26.5”D
Shelf Area	5.4 ft.2 each, 26.9 ft. 2 total
Materials/Finishes
Interior	Interior cabinet – all stainless steel
Exterior	Exterior cabinet – powder coated metal Exterior Door – Triple Pane Glass Door, Lockable
Feet	Adjustable leveling guides
Electrical	115V/25A/60Hz
Shipping Weight	750 lbs (340kgs)
Warranty	12 month parts and labor

*RH levels limited by 4ºC minimum dewpoint. Specifications were established at 20ºC with 50% RH ambient conditions, 115VAC,60Hz, without lights, Note: Specifications subject to change without notice.

Optional Features and Accessories

• Model 2030: Light package, eight 20 watts fluorescent lights, 2 per shelf on 4 of 5
  shelves, includes cycle timer for day/night temperature settings
• Contact closure allows chamber temperature and humidity controls to switch between
  two setpoints
• Insulated solid door
• Computer communications: PC-based remote interface software to log data, and to
  set and adjust control panel from a remote terminal or personal computer
• Temperature and RH% controller with field configurable Ramp/Soak programs
• Independent product temperature safety with digital display, audible and visual alarm
  and thermocouple for the product/sample being tested
• Circular chart recorder, temperature and relative humidity, 2-pen, 10-inch, 7-day,
  0 to 60ºC, side or wall mounted
• Strip chart recorder, 100mm wide chart, 2-pen records temperature and relative
  humidity, front panel mounted
• Heatless dryer package, purge air system using compressed air to lower the RH%
  levels.
• Additional wire rod shelves and/or solid stainless steel shelves
• Interior duplex electrical outlet
• Expanded temperature ranges (consult factory for details)
• International voltages, 50Hz, CE compliance (consult factory for details)

Model 2030 Overview

| Environmental Rooms | Dry Rooms | Clean Rooms | Archival Storage Vaults | | Stress Screening Chambers | Service Division | Site Map | Home | Top of Page |

Harris Environmental Systems, Inc. • 11 Connector Road • Andover, MA 01810

tel: (978) 470-8600 • fax: (978) 475-7903